Epsilon Electronics car multimedia system Instalační manuál Strana 41

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 58
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 40
Safety Instructions
PLEASE
READ
COMPLETELY
AND
BECOME FAMILIAR WITH THE CONTENTS
OF
THIS MANUAL BEFORE INSTALLATION
AND
OPERATION
OF
THIS UNIT.
KEEP
THIS
MANUAL
FOR
FUTURE REFERENCE.
This unit is a class 1 laser product. The laser beam
may
cause hazardous radiation
if
exposed to laser system directly. Do
not
attempt to disassemble the unit personally.
This unit has been designed and manufactured to assure personal safety. Improper use
can result in electric shock
or
fire hazard.
A warnings
-Do
not
expose the product to rain, water or excessive moisture. This could cause
electrical shorts, fire
or
other damage.
-This product is designed to operate with a 12 volt DC, negative ground battery system.
Use the proper power supply.
-The monitor is operated automatically. Do
not
push in
or
pull out the monitor
or
try to
rewind
the monitor manually! Do
not
attempt to adjust the monitor angle upward
or
downward manually.
It
will cause damage to the Monitor Mechanism Structure.
-Do
not
impact the monitor with a hard object.
It
may cause permanent damage.
-Do
ground all equipments and works in order to avoid causing damage to the unit by
electrostatic discharges.
-The user
who
handles this product should take all necessary precautions to avoid ESD
(Electro-Static Discharge) failures.
-Do
not
attempt to install
or
service
your
unit by yourself. Installation
or
servicing
of
the unit
by persons without training and experience in electronic equipment and automotive
accessories may be dangerous and could expose you to the risk
of
electric shock or
other hazards.
Important
Safeguards
<D
To reduce the risk
of
fire
or
electric shock, and annoying interference, use only the
recommended accessories.
<D
While driving, keep the volume level low enough to
be
aware road and traffic
conditions.
<D
Parking in direct sunlight can produce very high temperatures inside your vehicle. Give
the interior a chance to cool down before starting playback.
CD
Do not use any chemical solvent, cleaning agent
or
corrosive detergent to clean away
dirt on the surface
of
the TFT monitor screen.
It
may
cause irreversible damage.
<D
Small black and shiny dots inside the liquid crystal panel should be considerd normal
for
liquid crystal displays.
<D
In extremely cold temperatures, the movement
of
the picture may
be
slow and the
picture
may
be dark, this is
not
a malfunction. The unit will work normally once reaching
proper operating temperatures.
CD
Do not use and store the unit in dusty, high temperature and high humidity environ-
ments.
41
Zobrazit stránku 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 57 58

Komentáře k této Příručce

Žádné komentáře